Owon TDS Series Touch Screen Digital Oscilloscope

Owon, Tektro

    - Max 200MHz bandwidth, up to 2GS/s realtime sample rate
    - 7.6M record length
    - 50,000 wfms/s waveform capture rate
    - waveform zooming (horizontal / vertical), and saving
    - FFT points (length, and resolution variable)
    - multi-window extension
    - user-friendly voice warning
    - 8 inch 800 x 600 pixels high def LCD
    - multi- communication interface : USB, VGA, LAN

    Application

    electronic circuit debugging
    circuit testing    
    design and manufacture
    education and training   
    automobile maintenance and testing

    Model  TDS7104  TDS8104  TDS8204
    Bandwidth 100MHz 200MHz
    Channel 4
    Sample Rate 1GS/s 2GS/s
    Waveform Capture Rate 50,000 wfms/s
    Display 8" touch screen color LCD
    Input Coupling DC, AC, and GND
    Input Impedance 1MΩ ± 2%, in parallel with 10pF ± 5pF ; 50Ω ± 1%
    Probe Attenuation Factor 1X, 10X, 100X, 1000X
    Max Input Voltage 1MΩ input impedance : 400V (PK - PK) (DC + AC, PK - PK) ; 50Ω input impedance : 5V (PK - PK) (DC + AC, PK - PK)
    Channel Isolation 50Hz:100:1 ; 10MHz:40:1
    Interpolation sin(x)/x
    Record Length 7.6M
    Horizontal Scale (s/div) 2ns/div - 100s/div, step by 1 - 2 - 5
    Interval (Delta T) Accuracy (full bandwidth) Single : ±(1 interval time + 100ppm × reading + 0.6ns), Average>16 : ±(1 interval time + 100ppm × reading + 0.4ns)
    Vertical Resolution (A/D) 8 bits resolution (4 channels simultaneously)
    Vertical Sensitivity 2mV/div - 10V/div (at input)
    Analog Bandwidth 100MHz 200MHz
    LF Respond (AC, -3dB) ≥10Hz (at input, AC coupling, -3dB)
    Rise Time ≤3.5ns ≤1.7n
    DC Accuracy ±3%
    Trigger Type Edge, Pulse, Video, Slope
    Trigger Mode Auto, Normal, Single
    Trigger Level Range ±6 div from the screen center
    Trigger level Accuracy (typical) ±0.3 div
    Line / Field Frequency (video) NTSC, PAL, and SECAM standard
    Automatic Measurement Vpp, Vavg, Vamp, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
    Rise Time, Fall Time, Delay A→B↑, Delay  A→B↓, +Width, -Width, +Duty, -Duty
    Waveform Math +, -, ×, ÷, FFT
    Waveform Storage 4 reference waveforms
    Lissajous Figure Bandwidth full Bandwidth
    Phase Difference ±3 degrees
    Cursor Measurement Delta V, and Delta T between cursors
    Communication Port USB host, USB device, VGA, LAN, AUX
    Power Supply 100 - 240 V AC, 50/60Hz, CAT II
    Dimension (W×H×D) 380 × 180 × 115 (mm)
    Weight (without package) 1.5 kg

     

Owon SDS E Series Digital Oscilloscope

OWON, OSILOSKOP, OSCILLOSCOPE, TEKTRONIX, LECROY, KEYSIGHT, FLUKE, YOKOGAWA

    Bandwidth : 30MHz - 125MHz
    Sample rate : 250MS/s - 1GS/s
    100K record length (10M optional, SDS5032E excluded)
    Ultra-thin body
    8 inch high def TFT display
    Pass / Fail function
    Add / Remove measure function,
    User-defined measurement menu

    Application

    electronic circuit debugging                
    circuit testing   
    design and manufacture
    education and training
    automobile maintenance and testing

    Model SDS5032E SDS6062E SDS7072E SDS7102E SDS7122E
    Bandwidth 30MHz 60MHz 70MHz 100MHz 125MHz
    Sample Rate (real time) 250MS/s 500MS/s 1GS/s
    Horizontal Scale (s/div) 4ns/div~100s/div, step by 1~2~4 5ns/div - 100s/div, step by 1 - 2 - 5 2ns/div - 100s/div, step by 1 - 2 - 5
    Rise Time (at input, typical) ≤11ns
    Channel 2 + 1 (external)
    Display 8" color LCD, TFT display , 800 × 600 pixels, 65535 colors
    Input Impedance 1MΩ ± 2%, in parallel with 15pF±5pF
    Channel Isolation 50Hz : 100 : 1, 10MHz : 40 : 1
    Max Input Voltage 400V (PK - PK) (DC+AC, PK - PK)
    DC Gain Accuracy ±3%
    Record Length 10K 100K (optional 10M)
    DC Accuracy (average) Average≥16:±(3% reading + 0.05 div) for ?V
    Probe Attenuation Factor 1X, 10X, 100X, 1000X
    LF Respond (AC, -3dB) ≥10Hz (at input, AC coupling, -3dB)
    Sample Rate / Relay Time   Accuracy ±100ppm
    Interpolation sin (x) / x
    Interval (Delta T) Accuracy  (full bandwidth) Single : ±(1 interval time + 100ppm × reading + 0.6ns), Average>16 : ±(1 interval    time + 100ppm × reading + 0.4ns)
    Input Coupling DC, AC , and GND
    Vertical Resolution (A/D) 8 bits resolution (2 Channels simultaneously)
    Vertical Sensitivity 5mV/div~10V/div (at input) 2mV/div~10V/div (at input)
    Trigger Type Edge, Pulse, Video, Slope Edge, Pulse, Video, Slope, Alternate
    Trigger Mode Auto, Normal, Single
    Trigger Level ±6 divisions from screen center
    Line / Field Frequency  (video) NTSC, PAL, and SECAM standard
    Cursor Measurement ?V, and ?T between cursors
    Automatic Measurement Vpp, Vavg, Vamp, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
    Rise Time, Fall Time, Delay A→B↑, Delay  A→B↓, +Width, -Width, +Duty, -Duty
    Waveform Math +, -, ×, ÷, FFT
    Waveform Storage 15 waveforms
    Lissajous Figure Bandwidth Full bandwidth
    Phase Difference ±3 degrees
    Communication Interface USB, USB flash disk storage, Pass / Fail, LAN, VGA (optional)
    Cymometer available
    Power Supply 100V - 240V AC, 50/60Hz, CAT II
    Power Consumption <18W
    Fuse 2A, T class, 250V
    Battery not supported
    Dimension (W×H×D) 348 × 170 × 78 (mm)
    Weight (without package) 1.50 kg

     

Owon MSO Series LA + Digital Oscilloscope

owon

    - 2 in 1 (DSO + LA)
    - 8 inch color LCD
    - USB data transmission supported
    - 20 group automatic measurement options

    Digital Storage Oscilloscope

    - Bandwidth : 60MHz - 200MHz
    - Sample rate : up to 2GS/s
    - Auto-scale function
    - FFT

    Logic Analyzer

    - Bandwidth : 100MHz - 200MHz
    - Sample rate : 20S/s - 2GS/s
    - 16 digital channels

    Application

    design and debug
    circuit function test    
    identified signals logic information     
    education and training
    mixed signal circuit test

    Model MSO5022S MSO7062TD MSO7102TD MSO8102T MSO8202T
    Bandwidth 25MHz 60MHz 100MHz 100MHz 200MHz
    Sample Rate (real time) 100MS/s 1GS/s 1GS/s 2GS/s
    Rise Time ≤14ns ≤5.8ns ≤3.5ns ≤1.7ns
    Display 7.8'' color LCD 8.0'' color  LCD , TFT screen, 640 × 480 pixels
    Channel dual + external trigger
    Horizontal Scale (s/div) 5ns/div - 5s/div, step by 1 - 2.5 - 5 2ns/div - 100s/div, step by 1 - 2 - 5 1ns/div - 100s/div, step by 1 - 2 - 5
    DC Accuracy (average) average>16 : ±(3% reading + 0.05div) for ?V
    Vertical Sensitivity 5mV/div - 5V/div 2mV/div - 10V/div
    DC Gain Accuracy ±3%
    Vertical Resolution (A/D) 8 bits (2 channels simultaneously)
    Interpolation sin (x) / x
    Max Input Voltage 300V (DC + AC, PK - PK) 400V (DC + AC, PK - PK )
    Probe Attenuation Factor 1X,10X,100X,1000X
    Trigger Mode Edge, Video, Alternate, Pulse, Slope
    Acquisition Mode Normal, Peak Detect, and Average
    Record Length max 6K points max 2M points
    Waveform Storage 4 waveforms
    Automatic Measurement Vpp, Vavg, Vamp, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
    Rise Time, Fall Time, Delay A→B↑, Delay  A→B↓, +Width, -Width, +Duty, -Duty
    Waveform Math +, -, ×, ÷, FFT
    Power Supply 100 - 240V AC, 50Hz / 60Hz, CAT?
    Lissajou’s  Figure Bandwidth 25MHz 60MHz 100MHz 200MHz
    Phase Difference ±3 degrees
    Communication  Interface USB1.1, and RS232 USB2.0, USB host, and RS232 / VGA (optional)
    Fuse 1A, T class, 250V
    Dimensions (W × H × D) 370 × 180 × 120 (mm)
    Weight (without package) 2.20 kg

    Logic Analyzer - Performance Specifications

    Model MSO5022S MSO7062TD MSO7102TD MSO8102T MSO8202T
    Sample Rate (real time) 20S/s - 200MS/s 20S/s - 2GS/s
    Bandwidth 40MHz 100MHz 200MHz
    Channel 16
    Record Length Max 4M each channel
    Input Impedance 660KΩ ± 5%, in parallel with 15 ± 5pF
    Trigger Mode Edge, Bus, State, Data Alignment, Data Width, Distributed Queue
    Trigger Position Setting Pre-trigger, Mid-trigger, and Re-trigger
    Threshold Voltage ±6V (4 settings)
    Input Signal Range ±30V
    Data Search available
    Data System binary, decimal, hex
    Digital Filter 0, 1, 2 optional
    Setting Storage 10 settings
    USB Flash Disk Storage available

     

Micsig MS300 Series Isolated Channel Scopemeter

MICSIG

    MS300 series handheld multi-function oscilloscope,whose bandwidth ups to 100~200MHz, sampling rate is 1GS/s, Memory depth is 240k. With the 5.7 inch large LCD screen, the instrument possesses the performance which desktop oscilloscope can not match at the same time without the complex operation panel of desktop ones. It provides the functions of fully featured Oscilloscope, Multimeter and Data Logger. It is widely uses for Equipment maintenance, aviation, R&D, automated industry, process controlling.

    Model

    Bandwidth

    Real time Sample Rate

    Rise Time

    Memory Depth

    Channel

    Touch operation

    Serial bus trigger 

    Max waveform capture

    MS310IT 100MHz 1GSa/s ≤3.5ns 240Kpts 2CH YES YES

    -(can be upgraded to 50K wfms/s)

    MS320IT 200MHz 1GSa/s ≤1.75ns 240Kpts 2CH YES YES

    -(can be upgraded to 50K wfms/s)

     
        

    Model

    MS310IT

    MS320IT

    Bandwidth (BW) 100MHz 200MHz
    Rise time ≤3.5ns ≤1.75ns
    Real time sampling rate single channel :1GSa/s,dual-channels:500MSa/s
     
    Memory depth single channel :240Kpts,dual-channels:120Kpts
     
    Isolated channel support
    Max waveform capture rate  -(can be upgraded to 50K wfms/s)
    Serial bus decode Optional

    Vertical system

    Channels 2 oscilloscope channels,1 multimeter channel
    Limited bandwidth 20MHz
    Coupling modes DC,AC,GND
    Inputs impedance parallel 1MΩ±1% with 15pF±3pF
    Vertical sensitivity 5mV/div~50V/div
    Vertical resolution 8bits
    Max voltage input 600V CAT ?   300V CAT ?
    Floating voltage from CHs to GND 1000V CAT ?   600V CAT ?
    DC vertical gain accuracy 5mV/div~50V/div,2.0%

    Horizontal system

    Timebase 4ns/div~10s/div
    Timebase delay range -12divs~50s
    Timebase accuracy 20ppm
    Sample mode normal,average, pk-pk,envelope
    Dynamic record  - (can be upgraded)
    Store waveform  4 ref waveforms  (can be upgraded to flash disk storage)

    Trigger system

    Trigger types edge, pulse, logic, serial bus(UART,LIN,CAN,SPI,I2C)
    Trigger coupling DC,AC,High-frequency suppression,Low-frequency suppression, Noise suppression
    Trigger modes auto, normal, single
    Trigger source CH1,CH2
    Inhibition range 200ns~10s

    Measurement

    Automatic measurements 31 types
    Cursor types horizontal cursor, vertical cursor, cross cursor

    Math

    Operator + , - , * , /
    FFT window settings Rectangular, Hamming, Blackman-Harris, Hanning

    Display Features

    Screen 5.7 inch TFT LCD touch screen
    Resolution 640*480
    3D waveform display not support
    Grid of waveform display zone horizontal 12 divs *vertical 8 divs
    Form YT form (can be upgraded to XY form)
    Persist auto, 100ms~10s or ∞

    I/O Port

    Mini USB2.0 connect to  PC
    USB2.0 connect to flash disk
    WIFI not support

    Multimeter 

    Measurement  types 10 physical measurements ,such as voltage, current, resistance, capacitance, diode , etc
    Measurement accuracy 4 bits
    Measurement display max, average, min, values with time stamp,relative measurement

    Data Logger

    Logger content multimeter measurements, oscilloscope waveform, oscilloscope measurements
    Logger timebase multimeter measurements,10s/div ~ 20min/div; oscilloscope measurements 10s/div ~ 20min/div
    oscilloscope waveform 100us/div ~ 2min/div
    Logger time length max 17 days (can be upgraded to flash disk record)

    Power 

    Power adapter input:100-240VAC,50-60Hz,2A; output:12VDC,5A
    Battery capacity:7.4V/6000mAh, work time:4~5 hours

    Work environment

    Temperature -20? ~ +50?
    Humidity < 85%RH

    Dimension

    Size 254mm*160mm*60mm
    Weight  main unit: 1380g (no battery), accessories(standard): 691g,battery(standard): 276g.

     

Micsig MS200 Series Scopemeter

MICSIG

    Micsig MS200 Series allows moving the waveform and zooming in and out in three ways: using the buttons, using the scroll wheel or using touch screen.The Micsig software, ScopeSuite, has functions including updating, real time control, measurement, storage, dynamic display, record and data analysis. The MS200 Series has a 5.7" TFT LCD touch screen with 640×480 resolution.
    FEATURES
    3 control modes: touch, button, scroll wheel
    ?240Kpts memory depth
    640*480 screen resolution
    31 auto measurements
    Cursor measurements
    3 record modes: multimeter, oscilloscope, and oscilloscope waveform
    multimeter is capable of conducting 10 measurements and tests such as AC/DC voltage, current, resistance, etc.
    ScopeSuite software

     

    Model

    Bandwidth

    Real time sample rate

    Rise time

    Memory depth

    Channel

    Touch operation

    Series bus trigger 

    MS207T 70MHz 1GSa/s ≤5ns 240Kpts 2CH YES YES
    MS210T 100MHz 1GSa/s ≤3.5ns 240Kpts 2CH YES YES
    MS215T 150MHz 1GSa/s ≤2.33ns 240Kpts 2CH YES YES
    MS220T 200MHz 1GSa/s ≤1.75ns 240Kpts 2CH YES YES

    micsig oscilloscope

     

    micsig oscilloscope

    Three operation modes for moving waveform, zooming in and out, and using menu by touch,button and scroll wheel.

    micsig oscilloscope

     

    micsig oscilloscope

    A perfect eye pattern contains an immense amount of parametric information about a signal, it gives you a visual indication of overall signal quality, noise level and signal jitter without looking at the data content. it finds errors like improper cable connections, bad contacts,incorrect grounding and missing or superfluous terminators. Serial bus trigger can be set to a variety of trigge conditions, users can find the wanted frame directly, reducing lots of their working loads.

    micsig oscilloscope

     

       micsig oscilloscope

    240Kpts memory depth   The ScopeSuite of Micsig's software functions include updating, real time control, measurement, storage, dynamic display, record and data analysis.

    micsig oscilloscope

     

    micsig oscilloscope

    640 * 480 high resolution    Persistance function keeps the abnormal signal stay longer and easy for analysis

    micsig oscilloscope

     

    micsig oscilloscope

    Indoor mode    Outdoor mode

    micsig oscilloscope

     

    micsig oscilloscope

    31 auto measurements   Horizontal cursor, vertical cursor, cross cursor 

    micsig oscilloscope

     

    micsig oscilloscope

    3 types of record modes:  multimeter record,oscilloscope measurement record and oscilloscope waveform record.
     
      10 physical measurements such as AC/DC voltage, current, resistance etc.

    Model

    MS207T

    MS210T

    MS215T

    MS220T

    Bandwidth (BW) 70MHz 100MHz 150MHz 200MHz
    Rise time ≤5ns ≤3.5ns ≤2.33ns ≤1.75ns
    Real time sampling rate single channel :1GSa/s,dual-channels:500MSa/s
    Memory depth single channel :240Kpts,dual-channels:120Kpts
    Isolated channel not support
    Max waveform capture rate  -(can be upgraded to 50K wfms/s)
    Serial bus trigger support

    Vertical system

    Channels 2 oscilloscope channels,1 multimeter channel
    Limited bandwidth 20MHz
    Coupling modes DC,AC,GND
    Input impedance parallel 1MΩ±1% with 15pF±3pF
    Vertical scale 5mV/div~50V/div
    Vertical resolution 8bits
    Max voltage input 600V CAT II   300V CAT III
    DC vertical gain accuracy 5mV/div~50V/div, 2.0%

    Horizontal system

    Timebase 4ns/div~10s/div
    Timebase delay range -12divs~50s
    Timebase accuracy 20ppm
    Sample mode normal,average, pk-pk,envelope
    Dynamic record  - (can be upgraded)
    Store waveform  4 ref waveforms  (can be upgraded to flash disk storage)

    Trigger system

    Trigger types edge, pulse, logic, serial bus(UART,LIN,CAN,SPI,I2C)
    Trigger coupling DC,AC,High-frequency suppression,Low-frequency suppression, Noise suppression
    Trigger modes auto, normal, single
    Trigger scource CH1,CH2
    Inhibition range 200ns~10s

    Measurement

    Automatic measurements 31 types
    Cursor types horizontal cursor, vertical cursor, cross cursor

    Math

    Operator + , - , * , /
    FFT window settings Rectangular, Hamming, Blackman-Harris, Hanning

    Display Features

    Screen 5.7 inch TFT LCD touch screen
    Resolution 640*480
    3D waveform display not support
    Grid of waveform display zone horizontal 12 divs *vertical 8 divs
    Form YT form (can be upgraded to XY form)
    Persist auto, 100ms~10s or ∞

    I/O Port

    Mini USB2.0 connect to  PC
    USB2.0 connect to flash disk
    WiFi not support

    Multimeter 

    Measurement  types 10 physical measurements ,such as voltage, current, resistance, capacitance, diode , etc
    Measuremet accuracy 4 bits
    Measurement display max, average, min, values with time stamp,relative measurement

    Data Logger

    Logger content multimeter measurements, oscilloscope waveform, oscilloscope measurements
    Logger timebase multimeter measurements,10s/div ~ 20min/div; oscilloscope measurements 10s/div ~ 20min/div
    oscilloscope waveform 100us/div ~ 2min/div
    Logger time length max 17 days (can be upgraded to flash disk record)

    Power 

    Power adapter input:100-240VAC,50-60Hz,2A; output:12VDC,5A
    Battery capacity:7.4V/6000mAh, work time:4~5 hours

    Work environment

    Temperature -20°C ~ +50°C
    Humidity < 85%RH

    Dimension

    Size 254mm*160mm*60mm
    Weight  main unit: 1380g (no battery), accessories(standard): 691g,battery(standard): 276g.

     

Micsig MS500 Series Isolated Channel Scopemeter

Micsig

    MS500 Series Handheld Multi-function Oscilloscopes provide the bandwidth of 100MHz or 200MHz, real-time sampling rate of 1GS/s and memory depth of 240k. The oscilloscopes come with 190k wfrms/s waveform refresh rate. Not only do the instruments have the function of Oscilloscope, but also functions of Multimeter, Data Logger and Serial Bus Analyzer. They can substitute for desktop oscilloscope with the same bandwidth completely, and have performance and benefits which desktop oscilloscope can not match. The instruments are the ideal choice for electric power, electron, auto, aviation, science, military industry, education and mining establishments. They will provide you service of more quality and more convenient.

    Model

    Bandwidth

    Real time sampling rate

    Rise time

    Memory depth

    Max capture rate

    Channel 

    Touch operation

    Serial bus trigger

    Serial bus decode

    MS510IT 100MHz 1GSa/s ≤3.5ns 240Kpts 190,000wfms/s 2CH YES YES NO
    MS510S 100MHz 1GSa/s ≤3.5ns 240Kpts 190,000wfms/s 2CH YES YES YES
    MS520IT 200MHz 1GSa/s ≤1.75ns 240Kpts 190,000wfms/s 2CH YES YES NO
    MS520S 200MHz 1GSa/s ≤1.75ns 240Kpts 190,000wfms/s 2CH YES YES YES
     
    Three isolated inputs include two oscilloscope inputs and one multimeter input, and all isolated inputs allow independent floating measurements with each input.  

    micsig oscilloscope ???

         

     

    micsig oscilloscope ???

     

    micsig oscilloscope ???

    Three operation modes for moving waveform, zooming in and out, and using menu by touch, button and scroll wheel.

     

    micsig oscilloscope ???  

    micsig oscilloscope ???

    I2C serial bus decoding graphic mode   I2C serial bus decoding text mode

    micsig oscilloscope ???

    Waveform capture rate offers how many waveforms display in a minute, "Dead zone" of oscilloscope is the time of processing and displaying the waveform which have been captured, during the time oscilloscope sacrifices any waveforms. the time of "Dead zone" is far more than "Display zone" for common oscilloscope, which results to signals can not be displayed in most time, so abnormal signals escaped. High capture rate oscilloscope reduces the "Dead zone" time and abnormal signals  can be caught fast and accurately.

     

    micsig oscilloscope ???  

    micsig oscilloscope ???

    High capture rate oscilloscope can catch occasional signal    Common capture rate oscilloscope easy to miss the occasional signal

     

    micsig oscilloscope ???

     

    micsig oscilloscope ???

    Support various video triggers such as PAL,NTSC,SECAM,720P,1080I,1080P

     

    Connect to flask disk for dynamic recording

     

    micsig oscilloscope ???

     

       micsig oscilloscope ???

    240Kpts memory depth   The ScopeSuite of Micsig's software functions include updating, real time control, measurement, storage, dynamic display, record and data analysis.

     

    micsig oscilloscope ???

     

       micsig oscilloscope ???

    640 *480 high resolution   Indoor /outdoor display mode

     

    micsig oscilloscope ???

     

    micsig oscilloscope ???

    31 auto measurements   Horizontal cursor,vertical cursor,cross cursor

     

    micsig oscilloscope ???

     

    micsig oscilloscope ???

    3 types of record modes: multimeter record, oscilloscope measurement record and oscilloscope waveform record.   13 physical measurements such as AC/DC voltage, current,resistance etc.

     

    Model

    MS510IT/MS510S

    MS520IT/MS520S

    Bandwidth(BW) 100MHz 200MHz
    Rise time ≤3.5ns ≤1.75ns
    Real time sampling rate single channel :1GSa/s,dual-channels:500MSa/s
    Memory depth single channel :240Kpts,dual-channels:120Kpts
    Isolated channel support
    Max waveform capture rate 190,000 wfms/s

    Vertical system

    Channels 2 oscilloscope channels,1 multimeter channel
    Limited bandwidth 20MHz
    Coupling modes DC,AC,GND
    Input impedance parallel 1MΩ±1% with 15pF±3pF
    Vertical sensitivity range 5mV/div~50V/div
    Vertical resolution 8bits
    Max voltage input 600V CAT II   300V CAT III
    Floating voltage from CHs to GND 1000V CAT II   600V CAT III
    DC vertical gain accuracy 5mV/div~50V/div, 2.0%

    Horizontal system

    Timebase 2ns/divs~10s/divs
    Timebase delay range -12divs~50s
    Timebase accuracy 20ppm
    Sample mode normal  average, pk-pk envelope
    Dynamic record max 2 hours
    Store waveform
    support internal waveform storage and flash disk storage

    Trigger system

    Trigger types edge, pulse, logic, vedio (PAL,NTSC,SECAM,720P,1080I,1080P)serial bus(UART,LIN,CAN,SPI,I2C)
    Trigger coupling DC,AC,High-frequency suppression,Low-frequency suppression, Noise suppression
    Trigger modes auto, normal, single
    Trigger source CH1,CH2,external
    Trigger inhibition range 200ns~10s

    Measurement

    Automatic measurements 31 types
    Cursor types horizontal cursor, vertical cursor, cross cursor

    Math

    Operator  + , - , * , /
    FFT window settings Rectangular, Hamming, Blackman-Harris, Hanning

    Display features

    Display screen 5.7 inch TFT LCD touch screen
    Resolution 640*480
    3D waveform display not support
    Grid of waveform display zone horizontal 12 divs * vertical 8 divs
    Form YT mode or XY mode
    Interpolation method sin(x)/x
    Persist auto, 100ms~10s or ∞

    I/O port

    Mini USB2.0 connect to  PC
    USB2.0 connect to Flash disk

    Multimeter

    Multimeter type 10 physical measurements ,such as voltage, current, resistance, capacitance, diode , etc
    Multimeter accuracy 4 bits
    Multimeter display max, average, min, values with time stamp; relative measurement

    Data Logger

    Logger content

    multimeter measurements, oscilloscope measurements, oscilloscope waveforms

    Logger timebase multimeter measurements,10s/div ~ 20min/div  
    oscilloscope measurements 10s/div ~ 20min/div
    oscilloscope waveform 100us/div ~ 2min/div
    Logger time length 49s~ ∞

    Power 

    Power adapter input:100-240VAC,50-60HZ,2A; output:12VDC,5A
    Battery capacity:7.4V/6000mAh, Work time:4~5 hours

    Work environment

    Temperature -20°C ~ +50°C
    Humidity < 85%RH

    Dimension

    Size 254mm*160mm*60mm
    Weight main unit: 1380g (no battery), accessories(standard): 691g,battery(standard): 276g

Siglent SHS800 Series Scopemeter

Siglent

    The SHS800 series is a portable oscilloscope with features normally found only on expensive bench-top instruments.  It is ideally suited for field application circuit measurements, electrical debugging, education, scientific research, and quality control.  It combines a sophisticated up to 200MHz oscilloscope, a 6000 count multimeter, and a waveform recorder in a portable unit with a bright 5.7” color TFT LCD screen.  With a bandwidth of up to200MHz, sampling at 500MSa/s, with a  2Mpts or 32kpt (Model SHS820) sample memory to allow storing, replaying and zooming in on measurements. 

    The built in data-recorder has up to 18 hours recording time, while the Meter TrendPlot can record multimeter measurement data for as long as 6000 hours at 0.05Sa/s. The Multimeter measures DCV, ACV, DCI, ACI, Resistance, Diode, Capacitance, and Continuity.
     
    Input voltage: input voltage through BNC is up to CATII 300V and CATIII 150V Standard probe: 10X CAT II 400V Optional probe: 10X CAT II 1000V and 10X CAT III 600V Oscilloscope and multimeter safety to CAT II 600V and CAT III 300V.
     
    The SHS800 series offers 32 automatic measurements,3 cursor measure modes, 4 digital filters (low-pass, high-pass, band-pass, band-limit) as well as Math functions +, -, ×, ÷, and X/Y plots, as well as FFT frequency display.  Multiple trigger types include video signal settings.
     
    It features USB device for software updates, and USB host capabilities for PictBridge-compatible printers. SHS800 connects to a PC through a USB cable for EasyScope control software and can save/recall waveforms to USB Flash drive. SHS800 can save 2 groups of reference waveforms, 20 groups of setups and 10 groups of waveforms in its internal memory, save setup data, waveform data, waveform interface image, and CSV file to an USB flash drive.
     
    The SHS800 comes with a rechargeable 7.4V 5000mAh Lithium battery pack which lasts up to 5 hours of continuous use, but a DC adapter, 100-240V 50/60Hz 9V 4A DC adapter is also provided.

    High-performance oscilloscope
    Bandwidth: 60MHz ,100MHz, 150MHz, 200MHz
    Real-time sampling rate: 1GS/s
    Equivalent sampling rate: 50GS/s
    Memory depth: 2Mpt

    Data recorder function
    7M internal storage, up to 18 hours recording time
    USB port, up to 3000 hours recording time
    Record, replay and zoom function supported

    High precision multimeter
    6000 counts display
    Accurate measurement of DCV,  ACV, DCI, ACI
    Accurate measurement of Resistance, Diode, Capacitance, Continuity

    TrendPlot
    32 measurement  trendplot  analyzer
    Scope: 800k points capacity, more than 24 hours recording time
    Meter: 1.2M points capacity 9320 hours recording time at 0.05S/s

    Model

    SHS806

    SHS810

    SHS815

    SHS820

    Bandwidth

    60MHz

    100MHz

    150MHz

    200MHz

    Rise Time

    ≤5.8ns

    ≤3.5ns

    ≤2.3ns

    ≤1.7ns

    Input Impedance

    1MΩ±2%, 18pf±3pf

    Real Time Sampling Rate

    Single Channel: 1GSa/s,
    Double Channels: 500MSa/s

    500MSa/s

    Equivalent Sampling Rate

    50GSa/s

    Memory Depth

    2Mpts

    32Kpts

    Time Base Range

    5 ns/ div – 50s/ div

    2.5 ns/ div – 50s/ div

    Scan Range

    100ms/ div ~ 50s/ div

    Vertical Sensitivity

    2mV/div – 100V/div(1-2-5 step)

    Vertical Resolution

    8 bits

    Trigger Types

    Edge, Pulse, Video, Slope, Alternative

    Frequency Counter

    6 bits

    Connection

    USB Device, USB Host

    Math

    +, -, * , /, FFT

    Oscilloscope Trend Plot

    800K points

     

    Multimeter Specifications
    Display  6000 
    Item  Range  Accuracy 
    DC Voltage  60mV - 1000V  ±1%±15digit   
    AC Voltage  60mV –750V  ±1%±15digit   
    DC Current  60mV -10A  ±1%±5digit 
    AC Current  60mV -10A  ±1%±5digit 
    Capacitance  40.00nF    ±3%±10digit  
    400.0nF-400.0uF     ±4%±5digit 
    Resistance  600Ω - 60MΩ  ±1%±5digit  
    Continuity buzzer  <50Ω   
    Diode   0V~2.0V     
    Trend plot  1.2M points   
    Recorder  7M points   
    Measuring mode Manual/Auto   
    General Features
    Display  5.7 inch color TFT-LCD, 320*234 
    Power Supply                   Charging/Battery 
    Power mode Lithium battery: 7.4V 5000mAh, Battery lasts 5 hours;
    DC adapter, 100-240V 50/60Hz input, 9V 4A output
    Weight  1.5Kg 
    Dimension  163.2mm×259.5mm×53.3mm
     

     

     

     

     

Siglent SHS 1000 Series Isolated Oscilloscope

Siglent, Oscilloscope, Tektronix, Agilent, Scopemeter, Owon, Micsig, Tablet Oscilloscope

    The SHS1000 series is a multifunction handheld 2-channel oscilloscope that also includes a full digital multimeter logger and a waveform recorder. Siglent’s patented Isolated Channel technology provides isolation from ground and between channels. With a signal bandwidth of 60MHz or 100MHz, this portable unit with a bright 5.7” color TFT LCD screen can measure at a real-time sample rate of 1GSa/s with a memory depth of 2Mpts, allowing storing, replaying and zooming in on measurements.

    The oscilloscope features multiple trigger types (Edge, Pulse, Video, Slope and Alternative), a rise time of less than 5.8ns, vertical sensitivity of 5mV/div – 100V/div and 8 bit vertical resolution.  The built-in multimeter of the SHS1000 series can also measure DC/AC voltage, DC/AC current, resistance, capacitance, diode and continuity in many ranges with a display count of 6000.  The SHS1000's built in data-recorder has up to 18 hours recording time, while the Meter TrendPlot can record multimeter measurement data for as long as 6000 hours at 0.05Sa/s. 

    Input voltage: input voltage through BNC is up to CATII 300V and CATIII 150V Standard probe: 10X CAT II 400V Optional probe: 10X CAT II 1000V and 10X CAT III 600V Oscilloscope and multimeter safety to CAT II 600V and CAT III 300V.

    The SHS1000 series offers 32 automatic measurements,3 cursor measure modes, 4 digital filters (low-pass, high-pass, band-pass, band-limit) as well as Math functions +, -, ×, ÷, and X/Y plots, as well as FFT frequency display.  Multiple trigger types include video signal settings.

    It features USB device for software updates, and USB host capabilities for PictBridge-compatible printers. SHS1000 connects to a PC through a USB cable for EasyScope control software and can save/recall waveforms to USB Flash drive. SHS1000 can save 2 groups of reference waveforms, 20 groups of setups and 10 groups of waveforms in its internal memory, save setup data, waveform data, waveform interface image, and CSV file to an USB flash drive.

    The SHS1000 comes with a rechargeable 7.4V 5000mAh Lithium battery pack which lasts up to 5 hours of continuous use, but a 100-240V 50/60Hz 9V 4A DC adapter is also provided.  Two 100MHz oscilloscope probes (1 x CAT II 1000V and 1 x CAT III 600V) are included too, as well as two test leads for multimeter measurements.

    • 2-channel device
    • Includes IsolatedChannel technology that isolates ground and between channels
    • 5.7 inch colour LCD display
    • 60 or 100MHz bandwidth
    • 6000 count multimeter measures DC/AC Voltage, DC/AC current, Resistance, Diode, Capacitance and Continuity
    • Includes Trendplot, Meter Trendplot and Scope recording functions
    • Automatic and manual trigger modes
    • Trigger types: Edge, Pulse, Video, Slope and Alternative
    • 32 automatic waveform measurements, 3 cursor measure modes
    • Digital filter functions: high pass, band pass, band limit
    • Mathematical functions: +, -, x, ÷ and FFT
    • Multiple language user interface
    • USB device and USB host with PC communication
    • Rechargeable battery
    • Ideal for multiple applications including power electronics, industrial power systems, field testing and more

    Model

    SHS1062

    SHS1102

    Bandwidth

    60MHz

    100MHz

    Rise Time

    ≤5.8ns

    ≤3.5ns

    Real Time Sampling Rate

    Single Channel: 1GSa/s, 
    Dual Channels: 500MSa/s

    Single Channel: 1GSa/s, 
    Dual Channels: 500MSa/s

    Equivalent Sampling Rate

    50GSa/s

    50GSa/s

    Memory Depth

    2Mpts

    2Mpts

    Time Base Range

    5 ns/ div – 50s/ div

    2.5ns/ div – 50s/ div

    Scan Range

    100ms/ div ~ 50s/ div

    100ms/ div ~ 50s/ div

    Vertical Sensitivity

    5mV/div – 100V/div(1-2-5 order)

    5mV/div – 100V/div(1-2-5 order)

    Vertical Resolution

    8 bits

    8 bits

    Trigger Types

    Edge, Pulse, Video, Slope, Alternative

    Edge, Pulse, Video, Slope, Alternative

    Frequency Counter

    6 bits

    6 bits

    Connection

    USB Device, USB Host

    USB Device, USB Host

    Math

    +, -, * , /, FFT

    +, -, * , /, FFT

    Oscilloscope Trend Plot

    800K points

    Meter

    Maximum Resolution

    6000

    DC Voltage

    60mV 
    600mV—1000V

    (±1%±15digit)
    (±1%±5digit)

    AC Voltage

    60mV
    600mV—750V

    (±1%±15digit)
    (±1%±5digit)

    DC Current

    60.00mA—600mA
    6A—10A

    (±1%±5digit)
    (±1.5%±5digit)

    AC Current

    60.00mA—600mA
    6A—10A

    (±1%±5digit)
    (±1.5%±5digit)

    Resistance

    600Ω—60MΩ

    (±1%±5digit)

    Capacitance

    40nF
    400nF--400uF

    (±3%±10digit)
    (±4%±5digit)

    Diode

    0—2V

    Continuity

    <50Ω Buzzer sounds

    Multimeter Trend Plot

    1.2M points

    channels from earth ground,

    between two channels

    references

    Overvoltage Category

    Maximum Voltage

    CAT I&CAT II

    1000 Vrms

    CAT ?

    600 Vrms

    between Multimeter input

    reference and the ground

    Overvoltage Category

    Maximum Voltage

    CAT I&CAT II

    600 Vrms

    CAT III

    300 Vrms

    Max. input Voltage for BNC

    Overvoltage Category

    Maximum Voltage

    1x CAT I&CAT II

    300 Vrms

    1X CAT III

    150 Vrms

    10x CAT I&CAT II

    1000 Vrms

    10X CAT III

    600 Vrms

    Max. input Voltage for
    Multimeter input port

    Voltage port

    DC 1000V, AC 750V

    Current port(mA)

    AC 250V/600mA

    Current port(A)

    AC 250V/10A

    Single Channel Common
    Mode Rejection, typical

    >1000:1 50MHz

    Channel-to-Channel Isolation

    >35 dB

     

    General Feature

    Display 

    5.7 inch color TFT-LCD, 320x234 

    Power supply 

    With battery or DC adapter 

    Power source 

    Built-in rechargeable lithium battery: 7.4V 5000mAh, Battery persisting 4 hours With DC adapter: 100-240V 50/60Hz input 9V 4A output. 

    Weight 

    1.5Kg  (3.3lb) 

    Dimension 

    163.2mm×259.5mm×53.3mm  (6.5” x 10.2” x 2.1”) 

     

Siglent SDS2000 Series Super Phosphor Oscilloscope

Siglent, Phosphor Oscilloscope, Tektronix, Agilent, Owon

    The SDS2000 series super phosphor oscilloscope equipped with the maximum 300 MHz bandwidth, 2GSa/s Sampling Rate as well as the design features of memory depth, high capture rate and multi- level intensity grading waveform display, is recognized as an universally applicable digital instrument with advanced technology and high-end performance. With the innovative SPO technology,  the SDS2000 series oscilloscope becomes outstanding in the same industry, and even develops a new era in  domestic digital oscilloscope industry.

    Bandwidth 70MHz,100MHz, 200MHz, 300MHz
    Real time sampling rate, Analog channel: 2GSa/s, Digital channel: 500MSa/s (optional)
    Provide 2/4 analog channels, 8 digital channels (optional)
    Built-in 25MHz function/arbitrary waveform generator(optional)?
    A variety of serial protocol trigger and decode functions (IIC, SPI, UART/RS232, CAN, LIN)?
    A variety of smart trigger functions (Pattern, Window, Interval, DropOut, Runt)?
    Support HDTV trigger?
    Support history function and segmented memory (std.up to 80,000 frames)?
    Hardware-based zoom function and high speed Pass/Fail function technology?
    32 kinds of automatic waveform measurements, support measurement statistics function?
    Advanced waveform math operations (FFT, differential, integral, square root)?
    Complete connectivity: USB Host, USB Device (USBTMC, PictBridge), LAN(VXI-11), EXT TRIG,? PASS/FAIL,TRIG OUT?
    Support SCPI remote control commands?
    Multi-language user interface and built-in online help system?
    8 inches TFT-LCD(800*480)

    Model

    SDS2072

    SDS2102

    SDS2202

    SDS2302

    SDS2074

    SDS2104

    SDS2204

    SDS2304

    Bandwidth

    70MHz

    100MHz

    200MHz

    300MHz

    Channels

    2/4CH + 1 EXT

    Max. real time sampling rate

    2Gsa/s

    Memory depth

    28Mpts

    Max. capture rate

    110,000wfms/s

    Input impedance

    1MΩ||20pF,50Ω

    Time base range

    1.0ns/div~50s/div

     

    ROLL:100ms~50s/div

    Vertical sensitivity

    2mV/div~10V/div

    Trigger types

    Edge, Pulse, Video, Slope, Interval, Runt,  Window, Pattern, DropOut, Series Protocol trigger

    Decode types

    IIC, SPI, UART/RS232, CAN, LIN

    MATH operation

    A+B, A-B, A×B, A/B, FFT, Diff, Intg, Sqrt

    Automatic Measurement

    Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROV, FOV, RPRE, FPRE, Rise time, Fall time, Freq, Period, + Wid, - Wid, + Dut, - Dut, BWid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF

    External storage

    Bitmap save, CSV save, Waveform save, Setup save

    Interface

    USB Host(support USB-GPIB), USB Device, LAN, EXT TRIG, Aux(TRIG OUT/Pass/Fail)

    Display

    8 inches TFT-LCD(800*480)

    Max. input voltage

    ±400V(DC+VppAC), CATI, CATII

    Power supply

    AC 100-240V, 45-440Hz, 50VA Max

    Dimensions

    352mm*112mm*224mm

    Weight

    3.4kg(2CH), 3.5kg(4CH)

Yokogawa DLM4000 Series Mixed Signal Digital Oscilloscopes

YOKOGAWA 8 CHANNEL OSCILLOSCOPE, TEKTRONIX, LECROY, SIGLENT, OWON

    Overview
    The DLM4000 Series Oscilloscope is unique to the industry, providing eight channel mixed signal suitable to test and debug applications in embedded systems, power electronics, mechatronics and automotive sectors. Available in both 350MHz and 500MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels.

    Features

    • Built-in user friendly Graphical help. No need to consult the user's manual. 
    • Multiple language support: English, Japanese, Chinese, Korean, Italian, French, German, Spanish, Russian.
    • Multi-Color LED display. 
    • Statistical Analysis. 
    • Trend and Histogram of waveform parameters. 
    • Waveform monitoring on a PC. 
    • Data transfer to a PC. 
    • GO/NO-GO judgement using polygon zoning or waveform parameters is possible without programming. 
    • 29 different parameters such as Min, Max, Mean and Standard deviation from multiple acquisitions. 
    • Power supply analysis function. 
    • Extra Deep Memory (125 Mega-Points). Super long record lengths with ease. 

    The eight input channels features Flex MSO which converts to an 8-bit logic analyzer at the push of a button, with sixteen additional logic analyzer inputs as an option, making it into a 24-bit logic analysis system. 

    Advanced measurement and analysis features such as power analysis and serial-bus analysis, digital filtering, user-defined math, and super long record lengths (up to 125 Mega Points) make the DLM4000 a super powerful engineering tool. High-resolution 12.1 inch LCD display, compact landscape format, ergonomic and friendly user-interface makes this series easy to use.

    Model
    DLM4038  350Mhz   Standard 8 analog channels or 7 analog channels + 8-bit logic
    DLM40538  500Mhz   8 analog channels + 16-bit logic or 7 analog channels + 24-bit logic

    Download 
    DLM4000 Specifications (PDF)
    (documents are in PDF format and will open in a new window) 3.92MB

Yokogawa DL850 Series ScopeCorder

Yokogawa, Oscilloscope, Scopecorder, Data Acqusition, Tektronix, Fluke,  Agilent, owon, micsig, osiloskop

    Measure and analyze a wealth of signals in real-time and speed up development and fault finding. 
    The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines measurements of electrical signals, physical (sensors) and CAN / LIN serial buses and is able to trigger on electrical power related and other calculations in real-time.

    Flexible and Swappable Input Modules With Built-in Signal Conditioning

    Choose from 17 types of input module and install up to 8 in a ScopeCorder at a time to configure a ScopeCorder up to 128 channels.

    • Voltage & Currents
    • Sensor Outputs 
    • Temperature, Vibration/Acceleration, Strain, Frequency
    • Logic Signals & CAN / LIN

    Precise Measurement of Fast Switching Signals Even in the Harshest Environments

    Individually isolated and shielded input channels provide high-resolution and high sample rates.  

    Real-Time Evaluation of Dynamic Behavior within Power Applications

    Trend calculations such as active power, power factor, integrated power, harmonics and more using the new power math option.


     


    A Trustworthy Measurement Platform for Durability Testing

    Measurement recording up to 200 days to the large 2 Gpoint acquisition memory, the internal hard disk and/or PC hard disk.
     
    Reduce Time Spent on Fault Finding
    Capture transient signals even during long term measurements using powerful triggers and unique features such as dual capture & history memory.





     

    Fast and Large Acquisition Memory

    A ScopeCorder is equipped with a large & fast acquisition memory up to 2Gpoint and enables high sample rates of up to 100MS/s on multiple channels simultaneously. This is ideal for viewing multiple inverter switching outputs simultaneously.
    • Standard memory 250MPoint
    • Expanded memory 1GPoint (/M1 Option)
    • Expanded memory 2GPoint (/M2 Option)







    Giga Zoom Engine II

    Zoom into 2 Billion samples in just a blink of the eye. Each ScopeCorder is equipped with the revolutionary Giga Zoom Engine II, a powerful processor designed for optimizing access to data seamlessly. It is possible to activate 2 zoom windows while displaying the entire original signal. 

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    Capture and record detailed waveforms from milliseconds up to months

    A ScopeCorder provides a wide variety of unique acquisition features to handle small or large amounts of data. Therefore it can perform multi-channel measurements for longer measurement periods while still being able to precisely capture transient events with the highest detail.

    Reduce time spend on fault finding or transient analysis - simple & enhanced triggers

    Having the possibility to set individual triggers on multiple channels provides the power to investigate what causes a particular transient event. Moreover, the availability of a large acquisition memory, and thus longer measurement time, helps the analysis of the effect of such an event on other parts of the application.

    Wave Window Trigger
    The ideal trigger for AC power line monitoring. Easily capture voltage sags, interfering impulses, phase shifts or drop outs.

    Action on trigger
    Leave a ScopeCorder unattended and automatically save the waveform to a file or send an email for notification of a trigger event.

    Capture High-Speed Transients During Long Term Recording - Dual capture
    To visualize long term trends for durability testing, data is typically acquired at lower speed sample rates. On the other hand, suddenly-occurring transitional phenomena have to be captured at high-speed sample rates and detail to be able to investigate the event. The "Dual Capture" function uniquely resolves these conflicting requirements by recording at two different sampling rates.

    Set waveform triggers and capture 5,000 high-speed transient events at sample rates up to 100 MS/s, while at the same time continuously record trend measurements at up to 100kS/s.

    Recall waveform events - History Memory
    When an abnormal phenomenon is spotted during a repetitive high speed measurement, the anomaly has often already disappeared from the screen by the time the measurement is stopped. With a ScopeCorder the "History" function is always active and automatically divides the available acquisition memory in up to 5,000 "history waveforms".

    These history records are easily accessible and can be displayed simultaneously after measurement is stopped. Using condition-based searches inside the history memory, users can quickly isolate individual waveforms records. Once the required waveforms have been identified they can be used for further analysis.

    Cursor Measurement
    Using cursors is a quick and easy method to measure waveform parameters on the screen. Available cursors are horizontal, vertical, marker, degree or combined horizontal & vertical.

    Automatic Waveform Parameter Measurement
    The parameter measure function is the most precise method for automatically calculating any or all of the 28 different waveform parameters such as, amplitude, peak to peak values, RMS, rise time, frequency and more.The internal time clock (date and time) can be synchronized and adjusted across multiple units. Applications are likely to include synchronizing the ScopeCorder at a windmill farm, finding faults in power grids, and more.

    Cycle Statistics
    With this powerful analysis function, the ScopeCorder measures selected parameters individually for each waveform cycle and provides statistical information which can easily be saved to a file. By selecting maximum or minimum values from the results, the instrument can automatically zoom into the selected waveform cycle for further analysis, potentially saving additional data analysis time.

    Real-time hard disk recording
    Use a ScopeCorder as a measurement platform for simple durability testing up to 200 days. Realtime hard disk recording enables measurement data to be streamed directly to either a built-in hard drive (/HD0 option) or via the eSATA interface (/HD1 option) to an external hard drive.

    Measurement examples to internal or external Hard Disk

    Continuous PC based data acquisition - ScopeCorder Acquisition Software
    Especially for longer duration or surveillance testing the ScopeCorder comes with an easy to setup acquisition software. The software enables continuous data recording to a PC hard drive. When using the software in free run mode there are virtually no restrictions in recording time and/or file size. Just click the start button to immediately start measurements!

    DL850EAcqSoft

    The Setup Wizard Makes It Easy
    Guided by four screens, the Setup Wizard easily guides you through the necessary settings for configuring the acquisition system such as measurement settings, data save and display options.

    GPS Time Synchronisation
    The ScopeCorders internal clock and the sampling clock can be time synchronized with a GPS clock reference using the /C20 or /C30 option. This allows multiple units to be synchronised in order to combine measurements from different remote locations with most accurate timing. Applications are likely to include synchronising the ScopeCorder measurements at a windmill farm, finding faults in power grids and railway applications. Measurement files from multiple ScopeCorder units can be merged into one measurment overview using Xviewer software.

    GPS Interface (/C30 option)
    A GPS antenna (included with the option) can be directly connected to the ScopeCorder side panel.
    The instruments time clock and the sampling clock will be synchronized to the GPS clock with ±200ns accuracy.

    IRIG interface (/C20 option)
    An IRIG time code signal generated by an external GPS clock device (not included) can be offered to the ScopeCorder.

    Powerful Real-Time Calculations and Analysis Functions
    By default the ScopeCorder is equipped with a set of basic arithmetic mathematical functions such as addition, subtraction, division, multiplication, fast Fourier transformation and other computations. Furthermore to really enrich the measurement and analysis capabilities of a ScopeCorder, several real-time options are available.

    Real-Time Measurement of Electrical Power - /G5 option
    Trend calculations such as active power, power factor, integrated power and harmonics, using a dedicated Digital Signal Processor (DSP) that is able to calculate and display up to 126-types of electrical power related parameters in real-time. This enables the user to display raw waveform signals such as voltages and currents along with power calculated parameters and even the capability to trigger on all of them. Data updating rate up to 100kS/s. Trend waveforms of each order of harmonics, bar-graphs and vector displays can be displayed. Both RMS and Power analysis modes are available. Besides the powerful power calculations, the /G5 option also contains all the functionality of the /G3 option.

    Real-Time Mathematical Computations and Digital Filtering - /G3 option
    Armed with a dedicated digital signal processor the ScopeCorder can perform mathematical calculations such as arithmetic operators with coefficients, integrals and differentials, and higher order equations on acquired measurement data. The results of these calculations are displayed during waveform capture in real-time. In addition to mathematical operators, steep digital filters can also be selected to isolate or trigger on the amplitude of certain frequency components.

    User defined computations - /G2 option
    With user defined computations it is possible to create equations using a combination of differentials and integrals, digital filters, and a wealth of other functions. Moreover it is possible to perform various types of FFT analysis using two FFT windows. In applications such as vibration and shock tests, you can easily evaluate abnormal vibrations while simultaneously measuring other signals.

    Application Example | With FFT

    The ScopeCorder Vehicle Edition is designed for engineers working in the automotive and railway industry. A common measurement challenge is to combine measurements of electrical signals, physical performance parameters, indicated by sensors, together with CAN- or LIN-bus data transmitted by the powertrain management system. A ScopeCorder Vehicle Edition addresses this requirement by providing a thorough insight into the dynamic behavior of the electromechanical system. The result is a considerable saving of time compared to other approaches such as analysis on a PC or the use of other software.

    CAN and LIN Bus Monitoring
    Use a ScopeCorder to decode the CAN or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.


    Symbol Editor
    The symbol editor is a software tool which makes it possible to define which physical values from the CAN- or LIN-bus data frame have to be trended as waveform data on the display of the ScopeCorder. The Symbol Editor can accept vehicle-installed network definition files (CAN DBC, LIN LDF).

    Battery Powered Operation - /DC option
    In addition to AC power, it is also possible to take the ScopeCorder Vehicle Edition in a vehicle and power the unit from the vehicle's DC battery. The DC power option allows AC and DC power supplies to be used together to ensure a highly reliable power source. If the AC power goes down, the DL850EV instantly switches to the DC supply without interrupting the measurement.

    • DC power (10 - 18V)
    • AC power (100 - 120V / 200 - 240V)

    Flexible operation and a variety of connection interfaces
    A ScopeCorder has been designed to grant users access to functionality in the field quickly and easily using the front panel menu buttons. For users that prefer workbench operation it is possible to connect a USB mouse or keyboard.

    Front View

    Left Side View

    Right Side View

     

Owon RDS1021i Pen type Oscilloscope

Owon, Osiloskop, test ve mühendislik, Oscilloscope, Keysight, tektronix

    - 25MHz bandwidth - 100MS/s sample rate - 5K record length - FFT function - Human engineering design - Multi- action mode via creative trackball - Multi- trigger option : edge, slope, and pulse - 5mV micro signal supported - USB bus powering, and optional USB isolated function - Easy portability, pocket accommodated 

    Bandwidth 25MHz
    Sample Rate 100MSa/s
    Horizontal Scale (s/div) 5ns/div - 100s/div, step by 1- 2 - 5
    Rise Time ≤14ns 
    Record Length 5K
    Input Coupling DC, AC , and GND
    Input Impedance 10MΩ±2% (X 10), 1MΩ±2% (X1)
    Input Capacitance 20pF±5pF
    Max Input Voltage 400V ( PK - PK) (DC + AC, PK - PK)
    DC Gain Accuracy ±3%
    DC Accuracy (average) average≥16 : ±(3% reading + 0.05 div) for ?V
    Analog Bandwidth 25MHz 
    Probe Attenuation Factor 1X, 10X
    LF Respond (AC, -3dB) ≥10Hz 
    Interpolation Sin(x)/x
    Displacement ±10 divisions                    
    Interval (?T) Accuracy
    (full bandwidth)
    Single : ±(1 inter val time + 100ppm × reading + 0.6ns), 
    Average>16 : ±(1 inter val time + 100ppm × reading + 0.4ns)
    Vertical Resolution (A/D) 8 bits
    Vertical Sensitivity 5mV/div - 5V/div
    Trigger Type Edge, Pulse, Slope
    Trigger Mode  Auto, Normal, Single
    rigger Level  ±5 divisions from screen center
    Acquisition Mode Sample, Peak Detect and Average
    Cursor Measurement ? V and ?T between cursors
    Automatic Measurement Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot, 
    Rise Time, Fall Time, +Width, -Width, +Duty, -Duty
    Waveform Math FFT
    Communication Interface USB2.0
    Dimension (W×H×D) 150× 20× 18(mm)
    Weight (without package) 0.27kg