Micsig MS200 Series allows moving the waveform and zooming in and out in three ways: using the buttons, using the scroll wheel or using touch screen.The Micsig software, ScopeSuite, has functions including updating, real time control, measurement, storage, dynamic display, record and data analysis. The MS200 Series has a 5.7" TFT LCD touch screen with 640×480 resolution.
FEATURES
3 control modes: touch, button, scroll wheel
?240Kpts memory depth
640*480 screen resolution
31 auto measurements
Cursor measurements
3 record modes: multimeter, oscilloscope, and oscilloscope waveform
multimeter is capable of conducting 10 measurements and tests such as AC/DC voltage, current, resistance, etc.
ScopeSuite software
Model |
Bandwidth |
Real time sample rate |
Rise time |
Memory depth |
Channel |
Touch operation |
Series bus trigger |
MS207T | 70MHz | 1GSa/s | ≤5ns | 240Kpts | 2CH | YES | YES |
MS210T | 100MHz | 1GSa/s | ≤3.5ns | 240Kpts | 2CH | YES | YES |
MS215T | 150MHz | 1GSa/s | ≤2.33ns | 240Kpts | 2CH | YES | YES |
MS220T | 200MHz | 1GSa/s | ≤1.75ns | 240Kpts | 2CH | YES | YES |
|
|
Three operation modes for moving waveform, zooming in and out, and using menu by touch,button and scroll wheel.
|
|
A perfect eye pattern contains an immense amount of parametric information about a signal, it gives you a visual indication of overall signal quality, noise level and signal jitter without looking at the data content. it finds errors like improper cable connections, bad contacts,incorrect grounding and missing or superfluous terminators. Serial bus trigger can be set to a variety of trigge conditions, users can find the wanted frame directly, reducing lots of their working loads.
|
|
|
240Kpts memory depth | The ScopeSuite of Micsig's software functions include updating, real time control, measurement, storage, dynamic display, record and data analysis. |
|
|
|
640 * 480 high resolution | Persistance function keeps the abnormal signal stay longer and easy for analysis |
|
|
|
Indoor mode | Outdoor mode |
|
|
|
31 auto measurements | Horizontal cursor, vertical cursor, cross cursor |
|
|
|
3 types of record modes: multimeter record,oscilloscope measurement record and oscilloscope waveform record. |
10 physical measurements such as AC/DC voltage, current, resistance etc. |
Model |
MS207T |
MS210T |
MS215T |
MS220T |
Bandwidth (BW) | 70MHz | 100MHz | 150MHz | 200MHz |
Rise time | ≤5ns | ≤3.5ns | ≤2.33ns | ≤1.75ns |
Real time sampling rate | single channel :1GSa/s,dual-channels:500MSa/s | |||
Memory depth | single channel :240Kpts,dual-channels:120Kpts | |||
Isolated channel | not support | |||
Max waveform capture rate | -(can be upgraded to 50K wfms/s) | |||
Serial bus trigger | support | |||
Vertical system |
||||
Channels | 2 oscilloscope channels,1 multimeter channel | |||
Limited bandwidth | 20MHz | |||
Coupling modes | DC,AC,GND | |||
Input impedance | parallel 1MΩ±1% with 15pF±3pF | |||
Vertical scale | 5mV/div~50V/div | |||
Vertical resolution | 8bits | |||
Max voltage input | 600V CAT II 300V CAT III | |||
DC vertical gain accuracy | 5mV/div~50V/div, 2.0% | |||
Horizontal system |
||||
Timebase | 4ns/div~10s/div | |||
Timebase delay range | -12divs~50s | |||
Timebase accuracy | 20ppm | |||
Sample mode | normal,average, pk-pk,envelope | |||
Dynamic record | - (can be upgraded) | |||
Store waveform | 4 ref waveforms (can be upgraded to flash disk storage) | |||
Trigger system |
||||
Trigger types | edge, pulse, logic, serial bus(UART,LIN,CAN,SPI,I2C) | |||
Trigger coupling | DC,AC,High-frequency suppression,Low-frequency suppression, Noise suppression | |||
Trigger modes | auto, normal, single | |||
Trigger scource | CH1,CH2 | |||
Inhibition range | 200ns~10s | |||
Measurement |
||||
Automatic measurements | 31 types | |||
Cursor types | horizontal cursor, vertical cursor, cross cursor | |||
Math |
||||
Operator | + , - , * , / | |||
FFT window settings | Rectangular, Hamming, Blackman-Harris, Hanning | |||
Display Features |
||||
Screen | 5.7 inch TFT LCD touch screen | |||
Resolution | 640*480 | |||
3D waveform display | not support | |||
Grid of waveform display zone | horizontal 12 divs *vertical 8 divs | |||
Form | YT form (can be upgraded to XY form) | |||
Persist | auto, 100ms~10s or ∞ | |||
I/O Port |
||||
Mini USB2.0 | connect to PC | |||
USB2.0 | connect to flash disk | |||
WiFi | not support | |||
Multimeter |
||||
Measurement types | 10 physical measurements ,such as voltage, current, resistance, capacitance, diode , etc | |||
Measuremet accuracy | 4 bits | |||
Measurement display | max, average, min, values with time stamp,relative measurement | |||
Data Logger |
||||
Logger content | multimeter measurements, oscilloscope waveform, oscilloscope measurements | |||
Logger timebase | multimeter measurements,10s/div ~ 20min/div; oscilloscope measurements 10s/div ~ 20min/div oscilloscope waveform 100us/div ~ 2min/div |
|||
Logger time length | max 17 days (can be upgraded to flash disk record) | |||
Power |
||||
Power adapter | input:100-240VAC,50-60Hz,2A; output:12VDC,5A | |||
Battery | capacity:7.4V/6000mAh, work time:4~5 hours | |||
Work environment |
||||
Temperature | -20°C ~ +50°C | |||
Humidity | < 85%RH | |||
Dimension |
||||
Size | 254mm*160mm*60mm | |||
Weight | main unit: 1380g (no battery), accessories(standard): 691g,battery(standard): 276g. |