MS500 Series Handheld Multi-function Oscilloscopes provide the bandwidth of 100MHz or 200MHz, real-time sampling rate of 1GS/s and memory depth of 240k. The oscilloscopes come with 190k wfrms/s waveform refresh rate. Not only do the instruments have the function of Oscilloscope, but also functions of Multimeter, Data Logger and Serial Bus Analyzer. They can substitute for desktop oscilloscope with the same bandwidth completely, and have performance and benefits which desktop oscilloscope can not match. The instruments are the ideal choice for electric power, electron, auto, aviation, science, military industry, education and mining establishments. They will provide you service of more quality and more convenient.
Model |
Bandwidth |
Real time sampling rate |
Rise time |
Memory depth |
Max capture rate |
Channel |
Touch operation |
Serial bus trigger |
Serial bus decode |
MS510IT | 100MHz | 1GSa/s | ≤3.5ns | 240Kpts | 190,000wfms/s | 2CH | YES | YES | NO |
MS510S | 100MHz | 1GSa/s | ≤3.5ns | 240Kpts | 190,000wfms/s | 2CH | YES | YES | YES |
MS520IT | 200MHz | 1GSa/s | ≤1.75ns | 240Kpts | 190,000wfms/s | 2CH | YES | YES | NO |
MS520S | 200MHz | 1GSa/s | ≤1.75ns | 240Kpts | 190,000wfms/s | 2CH | YES | YES | YES |
Three isolated inputs include two oscilloscope inputs and one multimeter input, and all isolated inputs allow independent floating measurements with each input. |
|
|
|
|
Three operation modes for moving waveform, zooming in and out, and using menu by touch, button and scroll wheel. |
![]() |
|
|
I2C serial bus decoding graphic mode | I2C serial bus decoding text mode |
Waveform capture rate offers how many waveforms display in a minute, "Dead zone" of oscilloscope is the time of processing and displaying the waveform which have been captured, during the time oscilloscope sacrifices any waveforms. the time of "Dead zone" is far more than "Display zone" for common oscilloscope, which results to signals can not be displayed in most time, so abnormal signals escaped. High capture rate oscilloscope reduces the "Dead zone" time and abnormal signals can be caught fast and accurately.
![]() |
|
|
High capture rate oscilloscope can catch occasional signal | Common capture rate oscilloscope easy to miss the occasional signal |
|
|
|
Support various video triggers such as PAL,NTSC,SECAM,720P,1080I,1080P |
Connect to flask disk for dynamic recording |
|
|
|
240Kpts memory depth | The ScopeSuite of Micsig's software functions include updating, real time control, measurement, storage, dynamic display, record and data analysis. |
|
|
|
640 *480 high resolution | Indoor /outdoor display mode |
|
|
|
31 auto measurements | Horizontal cursor,vertical cursor,cross cursor |
|
|
|
3 types of record modes: multimeter record, oscilloscope measurement record and oscilloscope waveform record. | 13 physical measurements such as AC/DC voltage, current,resistance etc. |
Model |
MS510IT/MS510S |
MS520IT/MS520S |
Bandwidth(BW) | 100MHz | 200MHz |
Rise time | ≤3.5ns | ≤1.75ns |
Real time sampling rate | single channel :1GSa/s,dual-channels:500MSa/s | |
Memory depth | single channel :240Kpts,dual-channels:120Kpts | |
Isolated channel | support | |
Max waveform capture rate | 190,000 wfms/s | |
Vertical system |
||
Channels | 2 oscilloscope channels,1 multimeter channel | |
Limited bandwidth | 20MHz | |
Coupling modes | DC,AC,GND | |
Input impedance | parallel 1MΩ±1% with 15pF±3pF | |
Vertical sensitivity range | 5mV/div~50V/div | |
Vertical resolution | 8bits | |
Max voltage input | 600V CAT II 300V CAT III | |
Floating voltage from CHs to GND | 1000V CAT II 600V CAT III | |
DC vertical gain accuracy | 5mV/div~50V/div, 2.0% | |
Horizontal system |
||
Timebase | 2ns/divs~10s/divs | |
Timebase delay range | -12divs~50s | |
Timebase accuracy | 20ppm | |
Sample mode | normal average, pk-pk envelope | |
Dynamic record | max 2 hours | |
Store waveform |
support internal waveform storage and flash disk storage
|
|
Trigger system |
||
Trigger types | edge, pulse, logic, vedio (PAL,NTSC,SECAM,720P,1080I,1080P)serial bus(UART,LIN,CAN,SPI,I2C) | |
Trigger coupling | DC,AC,High-frequency suppression,Low-frequency suppression, Noise suppression | |
Trigger modes | auto, normal, single | |
Trigger source | CH1,CH2,external | |
Trigger inhibition range | 200ns~10s | |
Measurement |
||
Automatic measurements | 31 types | |
Cursor types | horizontal cursor, vertical cursor, cross cursor | |
Math |
||
Operator | + , - , * , / | |
FFT window settings | Rectangular, Hamming, Blackman-Harris, Hanning | |
Display features |
||
Display screen | 5.7 inch TFT LCD touch screen | |
Resolution | 640*480 | |
3D waveform display | not support | |
Grid of waveform display zone | horizontal 12 divs * vertical 8 divs | |
Form | YT mode or XY mode | |
Interpolation method | sin(x)/x | |
Persist | auto, 100ms~10s or ∞ | |
I/O port |
||
Mini USB2.0 | connect to PC | |
USB2.0 | connect to Flash disk | |
Multimeter |
||
Multimeter type | 10 physical measurements ,such as voltage, current, resistance, capacitance, diode , etc | |
Multimeter accuracy | 4 bits | |
Multimeter display | max, average, min, values with time stamp; relative measurement | |
Data Logger |
||
Logger content |
multimeter measurements, oscilloscope measurements, oscilloscope waveforms |
|
Logger timebase | multimeter measurements,10s/div ~ 20min/div oscilloscope measurements 10s/div ~ 20min/div oscilloscope waveform 100us/div ~ 2min/div |
|
Logger time length | 49s~ ∞ | |
Power |
||
Power adapter | input:100-240VAC,50-60HZ,2A; output:12VDC,5A | |
Battery | capacity:7.4V/6000mAh, Work time:4~5 hours | |
Work environment |
||
Temperature | -20°C ~ +50°C | |
Humidity | < 85%RH | |
Dimension |
||
Size | 254mm*160mm*60mm | |
Weight | main unit: 1380g (no battery), accessories(standard): 691g,battery(standard): 276g |