The SHS800 series is a portable oscilloscope with features normally found only on expensive bench-top instruments.  It is ideally suited for field application circuit measurements, electrical debugging, education, scientific research, and quality control.  It combines a sophisticated up to 200MHz oscilloscope, a 6000 count multimeter, and a waveform recorder in a portable unit with a bright 5.7” color TFT LCD screen.  With a bandwidth of up to200MHz, sampling at 500MSa/s, with a  2Mpts or 32kpt (Model SHS820) sample memory to allow storing, replaying and zooming in on measurements. 

The built in data-recorder has up to 18 hours recording time, while the Meter TrendPlot can record multimeter measurement data for as long as 6000 hours at 0.05Sa/s. The Multimeter measures DCV, ACV, DCI, ACI, Resistance, Diode, Capacitance, and Continuity.
 
Input voltage: input voltage through BNC is up to CATII 300V and CATIII 150V Standard probe: 10X CAT II 400V Optional probe: 10X CAT II 1000V and 10X CAT III 600V Oscilloscope and multimeter safety to CAT II 600V and CAT III 300V.
 
The SHS800 series offers 32 automatic measurements,3 cursor measure modes, 4 digital filters (low-pass, high-pass, band-pass, band-limit) as well as Math functions +, -, ×, ÷, and X/Y plots, as well as FFT frequency display.  Multiple trigger types include video signal settings.
 
It features USB device for software updates, and USB host capabilities for PictBridge-compatible printers. SHS800 connects to a PC through a USB cable for EasyScope control software and can save/recall waveforms to USB Flash drive. SHS800 can save 2 groups of reference waveforms, 20 groups of setups and 10 groups of waveforms in its internal memory, save setup data, waveform data, waveform interface image, and CSV file to an USB flash drive.
 
The SHS800 comes with a rechargeable 7.4V 5000mAh Lithium battery pack which lasts up to 5 hours of continuous use, but a DC adapter, 100-240V 50/60Hz 9V 4A DC adapter is also provided.

High-performance oscilloscope
Bandwidth: 60MHz ,100MHz, 150MHz, 200MHz
Real-time sampling rate: 1GS/s
Equivalent sampling rate: 50GS/s
Memory depth: 2Mpt

Data recorder function
7M internal storage, up to 18 hours recording time
USB port, up to 3000 hours recording time
Record, replay and zoom function supported

High precision multimeter
6000 counts display
Accurate measurement of DCV,  ACV, DCI, ACI
Accurate measurement of Resistance, Diode, Capacitance, Continuity

TrendPlot
32 measurement  trendplot  analyzer
Scope: 800k points capacity, more than 24 hours recording time
Meter: 1.2M points capacity 9320 hours recording time at 0.05S/s

Model

SHS806

SHS810

SHS815

SHS820

Bandwidth

60MHz

100MHz

150MHz

200MHz

Rise Time

≤5.8ns

≤3.5ns

≤2.3ns

≤1.7ns

Input Impedance

1MΩ±2%, 18pf±3pf

Real Time Sampling Rate

Single Channel: 1GSa/s,
Double Channels: 500MSa/s

500MSa/s

Equivalent Sampling Rate

50GSa/s

Memory Depth

2Mpts

32Kpts

Time Base Range

5 ns/ div – 50s/ div

2.5 ns/ div – 50s/ div

Scan Range

100ms/ div ~ 50s/ div

Vertical Sensitivity

2mV/div – 100V/div(1-2-5 step)

Vertical Resolution

8 bits

Trigger Types

Edge, Pulse, Video, Slope, Alternative

Frequency Counter

6 bits

Connection

USB Device, USB Host

Math

+, -, * , /, FFT

Oscilloscope Trend Plot

800K points

 

Multimeter Specifications
Display  6000 
Item  Range  Accuracy 
DC Voltage  60mV - 1000V  ±1%±15digit   
AC Voltage  60mV –750V  ±1%±15digit   
DC Current  60mV -10A  ±1%±5digit 
AC Current  60mV -10A  ±1%±5digit 
Capacitance  40.00nF    ±3%±10digit  
400.0nF-400.0uF     ±4%±5digit 
Resistance  600Ω - 60MΩ  ±1%±5digit  
Continuity buzzer  <50Ω   
Diode   0V~2.0V     
Trend plot  1.2M points   
Recorder  7M points   
Measuring mode Manual/Auto   
General Features
Display  5.7 inch color TFT-LCD, 320*234 
Power Supply                   Charging/Battery 
Power mode Lithium battery: 7.4V 5000mAh, Battery lasts 5 hours;
DC adapter, 100-240V 50/60Hz input, 9V 4A output
Weight  1.5Kg 
Dimension  163.2mm×259.5mm×53.3mm